User Manual

8
In the setup window, press the mode key to select the option to be adjusted
(date, time), and the selected option will be displayed in blue background.
Afterwards, press the T/W key to adjust the value; after the adjustment is over,
press the shutter key to confirm or press the power key to cancel the setting and
to return. Finally, press the power key to exit the setup mode.
Advanced Operations
Photographing mode
After startup, it’s set at the photographing mode. Press the shutter key to take a
picture.
Press the mode key to select the video recording mode.
Press the shutter key to start video recording; press the shutter key again to stop
video recording.
Press the T key or W key to conduct digital zoom.
Use of flash light: In the photographing or video recording mode, you can press
the delete key to turn on or off the flash light. (In the playback mode, the fill light
is unusable.)
Attention:

Hold the camera stably when photographing; it is
preferable to place it onto a support, e.g., tripod, etc., so as
to obtain clear photos.

After the shutter key is pressed to take a photo, the
operation indicator lamp will light up; at this moment, do
not move the camera. The camera can be moved only after
the operation indicator lamp goes out, so as to avoid taking
blurry photos.