BULLSEYE Cl i] iB fan BICYCLE TIRES MOTORCYCLE TIRES ing la INSTRUCTIONS BULLSEYE™ CORDLESS TIRE INFLATION ITEM NO. 3475 DISTRIBUTED BY EMS OM NEW YORK, MY 10001 USA SIDE ECHOS ALL RIGHTS RESERVED.
Thank you for buying the Bullseye™ Rechargeable Tire Infuriate the cordless handheld alr compressor that makes i quick and easy Io inflate car res and more! Buliseye™ Rechargeable Tire inflation uses powerful class leading air compressor technology to pull In outside alr and compress It before pumping X into the tire.
€} Cordials inflation € 12V 2000mAh Ll battery pack €) 12V DC car charger cord) €) 110/120 AC Battery Charger Cord (3.911.
= Align the grooves on both the battery pack and Hie main unit. Slowly slide & in until if clicks. PLEASE NOTE: Failure to fully charge the battery will result in shorter tie, and words performance. if run Hume has drastically reduced over time, i is ime to replace the battery. Please visit wew unreasoning io purchase a replacement. © Hun time will vary depending on the battery level, the pressure load during use, and the operating conditions.
To choose and set the desired pressure format (P51, BAR, KAPPA, press the ( m ) bunion continuously uni the desired format is displayed. « Remove valve cover (if needed). # Flip the lever of the Flexible Air Hose Quick Connector info the up/open position. = Attach the end of the quick connector onto the tire's naive stem quickly. Lower the lever {down/closed position) to lock it in place. © When connected, the gauge on the Digital LOD Display will show the tire's current pressure.
ps button for 2 seconds 1p turn on the unit. The LED lights will tum on and LCD display will light-up. = To set the desired tire pressure, press the (C buttons uri! the desired pressure level has been reached. = Once set, wait 2 moment until the current tire pressure display rectums, ® insert the nozzle Hip into the object to be inflated. = When connected, the gauge on the Digital LCD Display will show the object's current pressure. + Press the trigger fo start the pump motor.
NOTE: DO NOT STORE Wit H BATTERY PACK INSTALLED IN COMPRESSOR UNIT. if battery pack has been previously installed, remove it from the bottom of the unit by pressing down on the Release Button and sliding it out as shown above. important Buliseye™ Tire Inflation cannot be stored with the battery pack attached to the unit. Insert the Buliseve™ Tire Inflation into the storage bag, then pack the rest of the accessories next to the unit. 1 ig instar the Steel Pin Tip inch he Wis Tip for storage.
