User guide

ManualsBrandsBell & Gossett ManualsAccessories for waterV58222C Tank Purge Valve – TPV

TankPurgeValve–TPV

WARNING:LABELPARTNO.V56873

INSTALLEDINTHISLOCATION

(UNDERBELL&GOSSETT).IF

MISSING,ITMUSTBEREPLACED.

SAFETY

INSTRUCTION

Thissafetyalertsymbolwillbeusedinthismanualtodrawattention

tosafetyrelated instructions.Whenused,thesafetyalertsymbolmeans

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

FAILURETOFOLLOWTHESEINSTRUCTIONSMAYRESULTINA

SAFETYHAZARD.

INSTALLLER: PLEASELEAVETHISMANUALFORTHEOWNER’SUSE.

OPERATIONALLIMITS

WORKINGPRESSURE&TEMPERATURELIMITS

(SOLDERTYPELIMITSFORANSISTD.B.16.18)

NPT

MaximumOperatingPressure400psig(2758kPa)

MaximumOperatingTemperature250°F(121°C)

DESCRIPTION

TheBell &GossettTank PurgeValve(TPV) isacombination fullport

balltypeisolationvalveanddrainvalveusedtoconnectthesystemto

theexpansiontank.Thisvalveallows thetank to be drained for easy

servicing or tank replacement without having to drain the system.

Thesevalvesarefurnishedstandardwith adrainvalvewithstandard

/8"hoseconnection.

MAXIMUM MAXIMUM

LIMITATIONS LIMITATIONS

TYPEOF

/2"–1" 1

/4"–2"

SOLDER PRESSURE TEMP PRESSURE TEMP

PSI(kPa) °F(°C) PSI(kPa) °F(°C)

95-5 300(2069) 200(93) 300(2069) 175(79)

TIN- 250(1724) 225(107) 250(1724) 200(93)

ANTIMONY 200(1379) 250(121) 175(1207) 250(121)

ISOLATIONVALVE

SYSTEM

DRAINVALVE

TANK

FIGURE1

WARNING: Damage to the Tank Purge Valve or failure of

soldersealingjointsmayoccuriftheseoperationallimitsare

exceeded.Thiscanresultinwaterleakage.Failuretofollowthisin-

structioncancauseseriouspersonalinjuryand/orpropertydamage.

WARNING: Isolationvalvemustbeintheopenpositionwith

thehandleinlinewiththevalvebodywhenthesystemisin

operation.Failuretofollowtheseinstructionsmaycausesystemto

overpressurizeandcanresultinseriouspersonalinjury,deathand

propertydamage.

WARNING: Drain valve must be in the closed position

with the handle perpendicular to the valve body when the

system is in operation. Failure to follow these instructions can

causepropertydamageduetoleakagethroughthedrainvalve.

NOTE:Thisproductisnotintendedfor useinpotablewaterapplications.

WARNING:California Proposition 65 Warning! This product contains chemicals known to the State of California

to cause cancer and birth defects or other reproductive harm.

INSTRUCTION MANUAL

V58222C

Summary of content (2 pages)

PAGE 1
INSTRUCTION MANUAL V58222C ISOLATION VALVE TANK WARNING: LABEL PART NO. V56873 INSTALLED IN THIS LOCATION (UNDER BELL & GOSSETT). IF MISSING, IT MUST BE REPLACED. SYSTEM FIGURE 1 DRAIN VALVE Tank Purge Valve – TPV INSTALLLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE. NOTE: This product is not intended for use in potable water applications.
PAGE 2
INSTALLATION INSTRUCTIONS 1. Install Tank Purge Valve between the expansion tank and the system so that the drain valve is between the expansion tank and the isolation valve. (The union connection is installed on the tank). The Tank Purge Valve should be installed so that both the drain valve handle and the isolation valve handles are easy accessible. Refer to Figure 1. For typical installation drawings refer to Figure 2 and 3.