Accessories

ManualsBrandsBell & Gossett ManualsAccessories for waterV51019 ISO-FLO

INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.

SAFETY

INSTRUCTION

This safety alert symbol will be used in this manual to draw

attention to safety related instructions. When used, the safety

alert symbol means ATTENTION! BECOME ALERT! YOUR

SAFETY IS INVOLVED! FAILURE TO FOLLOW THESE

INSTRUCTIONS MAY RESULT IN A SAFETY HAZARD!

INSTRUCTION MANUAL

V51019

Installation, Operation, & Service Instructions

ISO-FLO

™

Accessories

Bell & Gossett

Morton Grove, IL, U.S.A.

DESCRIPTION

ISO-FLO Accessories includes ball type shutoff valves, inline

Y-type strainers and hook up hoses. Ball Valves are of bronze

construction with TFE seals. Y-Strainers are of bronze con-

struction with a stainless steel strainer. Hoses are EPDM

rubber with a braided stainless steel jacket.

BELL & GOSSETT

WARNING LABEL PART NO. V56871

INSTALLED IN THIS LOCATION. IF MISSING, IT MUST BE REPLACED.

Summary of content (4 pages)

PAGE 1
BELL & GOSSETT INSTRUCTION MANUAL V51019 WARNING LABEL PART NO. V56871 INSTALLED IN THIS LOCATION. IF MISSING, IT MUST BE REPLACED. ISO-FLO™ Accessories Installation, Operation, & Service Instructions INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE. SAFETY INSTRUCTION This safety alert symbol will be used in this manual to draw attention to safety related instructions.
PAGE 2
OPERATIONAL LIMITS (These products are designed for use with water or glycol products only in hydronic systems.) Accessory Shutoff valves (NPT) Shutoff valves (sweat) Strainers (NPT) Strainers (sweat) Hose 1/2" Hose 3/4" Hose 1" Hose 11/4" Hose 11/2 Temp ˚F (˚C) 250 (121) Pressure psi (kPa) 300 (2068.5) Based on solder type ASTM Std. B16.18 250 (121) 300 (2068.5) Based on solder type ASTM Std. B16.18 210 210 210 210 210 (99) (99) (99) (99) (99) 375 300 290 217 145 (2585.6) (2068.
PAGE 3
WARNING: Twisted hose assemblies may rupture, spraying hot and/or pressurized water. Use proper installation methods to prevent twisting. Failure to follow these instructions could result in serious personal injury, death and/or property damage. 5. After installation check all joints for leakage and retighten where necessary. OPERATING INSTRUCTIONS (SHUTOFF VALVES) The ball type shutoff valves will function as a service valve to isolate hydronic equipment for repairs.
PAGE 4
AUTHORIZED REPRESENTATIVE For further information, contact Bell & Gossett, 8200 N. Austin Avenue, Morton Grove, IL 60053, Phone (847) 966-3700 – Facsimile (847) 966-9052. Bell & Gossett PRINTED IN U.S.A. 9-96 Morton Grove, IL, U.S.A.