Replacement Parts List

PARTS LIST CP-400E-PL OLD DESIGN SERIES VSC AND VSCS PUMPS
13
SEAL AND PACKING FOR STUFFING BOX CONSTRUCTION
(VSCS) FLUSHED SINGLE SEAL CONSTRUCTION
(VSC-S, VSCS-S) FLUSHED SINGLE SEAL CONSTRUCTION
PUMP SIZE
4X4X9¼
4X4X9¼L
4X4X9¾
5X5X9¾
5X5X9¾B
5X6X9¾
5X6X9¾B
5X5X12
5X5X12B
5X5X12L
5X6X12
5X6X12B
5X6X12L
6X6X9¾
6X8X9¾
6X8X9¾H
6X8X9¾HL
4X5X14¾
5X6X15½
6X6X9¾B,L
6X8X9¾B,L
6X6X12
6X6X12L
6X8X12
6X8X12L
8X8X10½
8X10X10½
8X8X11¾L
8X10X11¾L
8X8X13
8X8X13B
8X10X13
8X10X13B
10X12X11
10X12X11¾L
8X10X17
10X10X13
10X10X13L
10X12X13
10X12X13L
10X12X17
12X14X12½
12X14X17½B
12X14X17½L 12X14X17½
DESCRIPTION (SIZE) (1-5/8”) (2”) (2-5/8”) (3”) (3¾”)
SEAL KIT (EPR/CARBON/TUNGSTEN) (2 REQUIRED)
185050 185051 185052 185376 185053
SEAL PLATE (2 REQUIRED)
P85086 P90352 P90356 P90560 P90483
SEAL PLATE GASKET (2 REQUIRED)
P85078▲ P85079▲ P85080▲ P75574 P80762▲
SHAFT SLEEVE (2 REQ’D) (PRIOR TO MAY, 1973-EN)
P90284 P90283 P90285 - -
SHAFT SLEEVE (2 REQ’D) (MAY, 1973-EN AND AFTER)
P90455 P90456 P90457 P80918 P90462
SLEEVE SET SCREW (4 REQUIRED)
P01808 → → - P01812
SLEEVE O-RING (2 REQ’D) (PRIOR TO MAY, 1973-EN)
J94137▲
1-3/8” I.D. X 1/16”W
J94138▲
1¾” I.D. X 1/16”W
J94139▲
2-3/8” I.D. X 1/16”W
- -
SHAFT O-RING (2 REQ’D) (MAY, 1973-EN AND AFTER)
J94126▲
1¼” I.D. X 1/16”W
J94127▲
1-5/8” I.D. X 1/16”W
J94129▲
2¼” I.D. X 1/16”W
P75573▲
QUAD RING
J94124▲
3”I.D. X 1/16”W
SHAFT COLLAR (2 REQUIRED)
P90281 P90280 P90282 P80920 P90460
COLLAR SET SCREW (4 REQUIRED)
J91995 → → J91996 →
SEAL PLATE CAPSCREW (8 REQUIRED)
H28100 H28200 → P01260 F19200
CAPSCREW WASHER (8 REQUIRED)
P10910 → → - P11190
SEAL CHAMBER (2 REQUIRED)
N/A N/A P90575† N/A N/A
BODY GASKET (2 REQUIRED)
N/A N/A P05790† N/A N/A
CAPSCREW (8 REQUIRED)
N/A N/A P03470† N/A N/A
- Factory recommended spare part.
† Replacement parts for 12x14x12½ and 10x12x17 models only.
▲ Quantity of 1 included with seal kit.
PUMP SIZE
10X12X17
12X14X12
½ 12X14X17½
DESCRIPTION (2⅝”) (3¾”)
SEAL KIT (BUNA/CARBON/CERAMIC) (2 REQUIRED) 185054 185055
SEAL PLATE (2 REQUIRED) P90356 P90483
SEAL PLATE GASKET (2 REQUIRED) P85080▲ P80762▲
SHAFT SLEEVE (2 REQ’D) (PRIOR TO MAY, 1973-EN) P90285 -
SHAFT SLEEVE (2 REQ’D) (MAY, 1973-EN AND AFTER) P90457 P90462
SLEEVE SET SCREW (4 REQUIRED) P01808 P01812
SLEEVE O-RING (2 REQ’D) (PRIOR TO MAY, 1973-EN) J94139 (2-3/8” I.D. X 1/16”W) ▲ -
SHAFT O-RING (2 REQ’D) (MAY, 1973-EN AND AFTER)
J94129 (2-1/4” I.D. X 1/16”W) ▲
J94124 (3” I.D. X 1/16”W)▲
SHAFT COLLAR (2 REQUIRED) P90282 P90460
COLLAR SET SCREW (4 REQUIRED) J91995 J91996
SEAL PLATE CAPSCREW (8 REQUIRED) H28200 F19200
CAPSCREW WASHER (8 REQUIRED) P10910 P11190