Submittal Sheet

SUBMITTAL
C-326A
JOB:
REPRESENTATIVE:
UNIT TAG:
ORDER NO.
DATE:
ENGINEER:
SUBMITTED BY:
DATE:
CONTRACTOR:
APPROVED BY:
DATE:
DESCRIPTION
Type BPX
Brazed Plate Heat Exchanger
DESCRIPTION
B & G type BPX brazed plate heat exchangers offer the highest level of
thermal efficiency and durability in a compact, low cost unit. The
corrugated plate design provides very high heat transfer coefficients,
resulting in a more compact design. The unit's stainless steel plates are
vacuum brazed together to form a durable, integral piece that can
withstand high pressure and temperature.
1. MODEL NUMBER:
Service: Cooler:
Heater:
PRIMARY SIDE
SECONDARY SIDE
2.
Fluid Circulated
APPROVALS
3.
Total Flow Expressed in GPM, GPH or lbs./min
4.
Specific Gravity
5.
Specific Heat
6.
Latent Heat
7.
Viscosity Expressed in Proper Units and
Temperature such as centipoises @ °F
8.
Temperature In/Out
9.
Heat Load BTU/hr
10.
Thermal Conductivity
11.
Maximum Operating Temperature of Unit
12.
Pressure Drop (Maximum)
13.
Fouling Factor or Percentage of Additional Surface
14.
ASME Code
Y or N