Brochure

vario
6.5” (65mm)
4.97” (126.1mm)
6.05” (153.6mm)
7.46” (189.6mm)
Materials of Construction
Pump Body: Cast Iron
O-Ring: EPDM
Bearing: Carbon/Alumina Ceramic
Impeller: Nylon/PPO
Motor: High Efciency ECM/PM
All Other Wetted Parts: Stainless Steel
Operating Data
Maximum Working Pressure: 150 PSI (10 Bar)
Maximum Working Temperature: 203°F (95°C)
Minimum Working Temperature: 40°F (4°C)
Motor
ECM/PM Spherical Motor
115 Volts, 60 HZ, 1 Phase
60 Watts Max Power Consumption
Automatic Overload Protection
Low in-rush current
Piping Connection
Flanged, 2-Bolt
For use with ¾, 1, 1¼, or 1½ inch pipe
5
4.17” (106mm)
2.68” (68mm)
CIRCULATORS ecocirc
®
vario
Heating/Cooling Circulator
Model Number Part Number Control Mode Shipping Weight
ecocirc 19-14 vario 6050B2001 vario – Constant Curve 9.25 lb
vario pump curves
1
6
5
4
3
2
7
vario Pump Curves
Setting 1
Setting 2
Setting 3
Setting 4
Setting 5
Setting 6
Setting 7
1
2
3
4
5
6
7
Our design separates the magnetic chamber from the ow
(for auto and vario)
Magnetite and sludge, which are both found in the pumped liquid and are both
magnetic, can accumulate at the permanent magnetic parts of a high efciency
pump, and therefore block and damage it. The Anti-Block Technology separates the
main ow of the pumped media completely from the permanent magnetic parts.
It is virtually impossible for the ecocirc auto or vario to block-up even in an old
open system.
The main ow of the pumped media
(blue) and its magnetite and sludge
particles (red) ow outside the inuence
area of the permanent magnet rotor
(bottom).
The side ow of the wet running
circulators, which is required for
lubrication and cooling of the bearing,
is separated from the main ow with its
magnetite and sludge.
Description
ecocirc 19-14 vario circulators are designed, with highly efcient electronically
commutated permanent magnet motor (ECM/PM technology), specially for
hydronic systems.
The ecocirc 19-14 vario has a constant curve control, which allows the pump to
follow the natural hydraulic curve of a circulator. Basically acts the same as a
standard 3-speed pump except with a step-less dial resulting in innite
speed control.
ecocirc 19-14 vario is ideal for replacement for existing circulators with induction
motors as well as new construction as primary or zone circulators.
Dimension (for auto and vario)