Brochure

The system can be controlled using
the timer and/or the built in thermostat
and has the option for a wireless push
button start.
water
heater
hot water
cold water
Optional push
button/signal repeater
(not included in kit).
Can be plugged into
any standard electrical
outlet in the house.
ecocirc
recirculation
pump
paired
mixing
valve
CIRCULATORS ecocirc
®
wireless
Potable Hot Water Recirculation Kit
10
Description
The ecocirc wireless is a potable hot water recirculation kit (a pump and valve
combination) for instant supply of hot water supply throughout the entire house.
The ecocirc pump is installed on the supply side of the hot water source and the
mixing valve under the sink farthest away from the hot water source. The pump
and valve are in constant wireless communication.
How it Works
The desired water temperature at the valve is set directly on the pump with the
thermostat dial. The water temperature is constantly checked by the valve and the
temperature values are sent to the pump. At approximately 5°F below the desired
water temperature, the pump will begin to circulate hot water. This circulation will
open the valve for hot water to cross into the cold water line, which creates a return
loop back to the hot water source. When the desired temperature is reached, the
pump will stop circulating. This is to prevent continuous circulation.
An Optional Push Button / Signal Repeater
A wireless device to provide instant hot water with a push of a button. The push button
device will override the timer operation and activate the pump to circulate hot water
until the desired temperature is met at the valve. This device also functions as a signal
repeater when the pump and valve have a weak signal due to distance or interference.
Model Number Part Number Connection
Dimension Inches (mm) Shipping
WT.
LBS. (kg)
A B C D E F G W X Y Z
ecocirc wireless
Recirculation Kit
6050B4000
Pump: 3/4” M/F NPT
Valve: 1/2” MNPT x
3/8” compression
4.84
(123)
6.87
(174.6)
4.47
(113.5)
1.97
(50.1)
2.93
(74.4)
4.74
(120.5)
2.68
(68)
3.5
(89)
1.1
(28)
0.87
(22)
5.45
(138.5)
3.9
(1.8)
Push Button/
Signal Repeater
6099B1500
Operating Data
Maximum Operating Temperature: 203°F (95°C)
Maximum Operating Pressure: 145 PSI (10 Bar)
Power Supply: 115 Volts, 60 HZ, 1 Phase
Power Consumption: 20 Watts
Operating Noise Level: 30 dB
Batteries: 2 AA Alkaline
Estimated Battery Life: 2 Years
Maximum Transmitter Range: 150 ft
Materials of Construction
Circulator Pump
Body: Lead-Free* Brass
Seals: EPDM
Impeller: Nylon/PPO
Internals: 316 Stainless Steel
*CSA certied to NSF/ANSI 372 that product contains less than 0.25% lead
content by weight on wetted surface.
Paired Mixing Valve
Body: Lead-Free* Brass
Springs: Stainless Steel
Valve Insert: Acetal Plastic
Seals: EPDM
Transmitter Housing: ABS Plastic
A
B
C
D
E
F
G
W
X
Y
Z