Brochure

The Series e-60 is a three-piece in-line centrifugal pump
designed for heating and cooling, potable water, and
other fluid transfer applications. Series e-60 features:
• Upgraded unitized mechanical seal
• Dimensional interchangeability with legacy Series 60
• Series e-60 ECM for simple variable speed control
• 3 year workmanship warranty (1 year for ECM)
Ease of Selection
Series e-60 pumps come in 9 sizes, with 144 available
stock models and many more Built-to-Order
configurations. Both stock and BTO pumps are easily
selectable using B&G pump selection and e-order
software.
Simple, Versatile Installation
The Series e-60 mounts directly to system piping by its
bolted flange connections, offering design flexibility and
saving valuable floor space. As a replacement pump,
the Series e-60 is a perfect drop-in solution, as flange-
to-flange and intake/suction dimensions are identical to
equivalent legacy Series 60 models — and even some
competitors’ pumps.
Robust Design
The Series e-60 employs high quality components for
smooth performance and long pump life. The pump’s
permanently lubricated rotating bearings come fully
enclosed in Polyrex™ grease for true maintenance-free
operation. The unitized mechanical seal offers better
performance and longer life.
Ease of Service
Three-piece design allows for minimally invasive service.
The motor, coupler, seal and impeller can all be repaired
or replaced without removing the pump from its
piping. The one-piece seal simplifies seal replacement,
eliminating the clumsy task of assembling difficult seal
components to the shaft.
Series e-60
Maintenance-Free In-Line Centrifugal Pump
2
Shown with optional ECM motor
Noise Level
Series e-60
Pump
Competitor’s
Pump
Series e-60 with
ECM Motor
Pump
Series e-60 with ECM Motor Pump is 5%
quieter than standard Series e-60
High Hydraulic Efciency
The Series e-60 boasts industry-leading hydraulic
efciency at each of its pump sizes.
The Series e-60’s “efciency islands” are also the widest
in its class, signifying high hydraulic efciency up and
down its performance curves, and energy savings at
any point of a variable load system. Even away from
its Best Efciency Point, Series e-60 performs more
efciently than its competition.
Motors
• B&G power pack and C-face motors
• 1/3 to 3 HP, 1725 RPM
• Standard ODP, optional TEFC
• All motor bearings permanently greased
Series e-60 ECM
• Variable Speeds from 300-1725 RPM
• On-board dial for manual speed control
• 0-10V DC signal input for automatic control
• Quieter operation than standard induction motors
• ECM up to 82% efcient at constant speed