Submittal Sheet

C. Product Data including certified performance curves and rated capacities of
selected models, weights (shipping, installed, and operating), furnished
specialties, and accessories. Indicate pump’s operating point on curves.
D. Complete Package information Product Data including:
o System summary sheet (where applicable)
o Sequence of Operation
o Shop drawing indicating dimensions, required clearances and location
and size of each field connection
o Power and control wiring diagram
o System profile analysis including pump curves, system curve, and
variable speed pump curves (where applicable)
o Pump data sheets - Rated capacities of selected models and indication
of pump’s operating point on curves.
o Submittals on furnished specialties and accessories
o Submittals must be specific to this project. Generic submittals will not be
accepted
E. Hanging and support requirements should follow the recommendations in the
manufacturer’s installation instructions.
1.08 OPERATION AND MAINTENANCE DATA:
A. Submit Operation and Maintenance information under provisions of Division 15
"Mechanical General Requirements" and the provisions of the General
Conditions and Division 1.
B. Operation and Maintenance Data: Include installation instructions, assembly
views, lubrication instructions, and replacement parts lists.
C. Under provisions of commissioning documentation; testing of pumps, as well as
training of owner’s operation and maintenance personnel may be required in
cooperation with the commissioning consultant.
1.09 DELIVERY, STORAGE, AND HANDLING:
A. Deliver materials to the site in such a matter as to protect the materials from
shipping and handling damage. Provide materials on factory provided shipping
skids and lifting lugs if required for handling. Materials damaged by the elements
should be packaged in such a matter that they could withstand short-term
exposure to the elements during transportation.
B. Store materials in clean, dry place and protect from weather and construction
traffic. Handle carefully to avoid damage.
1.10 WARRANTY:
A. Provide a minimum One (1) year warranty on materials and installation under
provision of Section 15010.