Submittal Sheet

SERIES PL - Permanently Lubricated Booster Pumps
A - 135F
DIMENSIONS AND WEIGHTS
Dimensions are approximate and subject to change. Contact factory for certified dimensions.
MODEL NO.
FLANGE SIZE
INCHES - NPT
MOTOR HP
DIMENSIONS - INCHES (mm)
APPROXIMATE
SHIPPING WT.
LBS. (KG)
A
B
C
D
E
PL - 30
3/4, 1,
1 - 1/4 & 1 - 1/2
1/12
8 5/8 (219)
6 3/8 (162)
7 1/8 (181)
4 3/16 (106)
4 3/8 (111)
11.6 (5.3)
PL - 36
3/4, 1,
1 - 1/4 & 1 - 1/2
1/6
8 5/8 (219)
6 3/8 (162)
7 1/8 (181)
4 3/16 (106)
4 3/8 (111)
13.1 (6.0)
PL - 45
1, 1 - 1/4
& 1 - 1/2
1/6
9 1/8 (232)
8 1/2 (216)
7 1/4 (184)
4 5/8 (117)
4 1/2 (114)
14.5 (6.6)
PL - 50
1, 1 - 1/4
& 1 - 1/2
1/6
9 1/8 (232)
8 1/2 (216)
7 1/4 (184)
4 5/8 (117)
4 1/2 (114)
14.5 (6.6)
PL - 55
3/4, 1,
1 - 1/4 & 1 - 1/2
2/5
9 9/16 (243)
6 3/8 (162)
7 15/16 (202)
4 3/16 (106)
4 3/4 (121)
13.1 (6.0)
PL - 75
2
1/6
9 15/16 (252)
8 1/2 (216)
7 3/8 (187)
5 3/16 (132)
4 5/8 (117)
18.5 (8.4)
PL - 130/2"
2
2/5
10 3/4 (273)
8 1/2 (216)
8 1/4 (210)
5 3/16 (132)
5 1/8 (130)
22 (10)
PL - 130/3"
3
2/5
10 3/4 (273)
8 1/2 (216)
8 1/4 (210)
6 (152)
5 1/8 (130)
27 (12.2)
TYPICAL SPECIFICATIONS
The contractor shall furnish and install inline pumps
as illustrated on the plans and in accordance with
the following specifications:
1. The pumps shall be of the horizontal,
permanently lubricated type, specifically designed
and guaranteed for quiet operation.
2. The pumps shall have a steel shaft supported by
permanently lubricated, sealed precision ball
bearings. The pumps are to be equipped with a
water-tight seal to prevent leakage. Mechanical seal
faces to be carbon on silicon carbide. The motor
shall be non-overloading at any point on the pump
performance curve.
3. The motor shall be of the drip-proof, sealed
precision ball-bearing, quiet-operating construction.
The permanent split-capacitor motor shall be
equipped with thermal overload protection.
4. Pumps to be suitable for 225°F (107°C) operating
temperature at 150 psig (10 bar) working pressure.
The pumps shall be Bell & Gossett, A Xylem brand.
Model No. PL-__________ with a capacity of
__________ GPM at __________ feet of head.
PERFORMANCE CHARACTERISTICS CURVES
Xylem Inc.
8200 N. Austin Avenue
Morton Grove, IL 60053
Phone: (847)966 - 3700
Fax: (847)965 - 8379
www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries.
© 2013 Xylem Inc.