Submittal Sheet

SERIES PL - Permanently Lubricated Booster Pumps A-135E
DIMENSIONS AND WEIGHTS
Dimensions are approximate and subject to change. Contact factory for certified dimensions.
MODEL NO.
FLANGE SIZE
INCHES - NPT MOTOR HP
DIMENSIONS
-
INCHES (mm)
APPROXIMATE
SHIPPING WT.
LBS. (KG)A B C D E
PL-30
3/4, 1,
1-1/4 & 1-1/2
1/12 8 5/8 (219) 6 3/8 (162) 7 1/8 (181) 4 3/16 (106) 4 3/8 (111) 11.6 (5.3)
PL-36
3/4, 1,
1-1/4 & 1-1/2
1/6 8 5/8 (219) 6 3/8 (162) 7 1/8 (181) 4 3/16 (106) 4 3/8 (111) 13.1 (6.0)
PL-45
1, 1-1/4
& 1-1/2
1/6 9 1/8 (232) 8 1/2 (216) 7 1/4 (184) 4 5/8 (117) 4 1/2 (114) 14.5 (6.6)
PL-50
1, 1-1/4
& 1-1/2
1/6 9 1/8 (232) 8 1/2 (216) 7 1/4 (184) 4 5/8 (117) 4 1/2 (114) 14.5 (6.6)
PL-55
3/4, 1,
1-1/4 & 1-1/2
2/5 9 9/16 (243) 6 3/8 (162) 7 15/16 (202) 4 3/16 (106) 4 3/4 (121) 13.1 (6.0)
PL-75 2 1/6 9 15/16 (252) 8 1/2 (216) 7 3/8 (187) 5 3/16 (132) 4 5/8 (117) 18.5 (8.4)
PL-130/2" 2 2/5 10 3/4 (273) 8 1/2 (216) 8 1/4 (210) 5 3/16 (132) 5 1/8 (130) 22 (10)
PL-130/3" 3 2/5 10 3/4 (273) 8 1/2 (216) 8 1/4 (210) 6 (152) 5 1/8 (130) 27 (12.2)
TYPICAL SPECIFICATIONS
The contractor shall furnish and install inline pumps
as illustrated on the plans and in accordance with
the following specifications:
1. The pumps shall be of the horizontal,
permanently lubricated type, specifically designed
and guaranteed for quiet operation.
2. The pumps shall have a steel shaft supported by
permanently lubricated, sealed precision ball
bearings. The pumps are to be equipped with a
water
-
tight seal to prevent leakage. Mechanical
seal faces to be carbon on silicon carbide. The
motor shall be non-
overloading at any point on the
pump performance curve.
3. The motor shall be of the drip-
proof, sealed
precision ball-bearing, quiet-
operating construction.
The permanent split-
capacitor motor shall be
equipped with thermal overload protection.
4. Pumps to be suitable for 225°F (107°C)
operating temperature at 150 psig (10 bar) working
pressure.
The pumps shall be ITT Bell & Gossett Model No.
PL-__________
with a capacity of __________
GPM at __________ feet of head.
PERFORMANCE CHARACTERISTICS CURVES
ITT
8200 N. Austin Avenue
Morton Grove, IL 60053
Phone [phone]
Facsimile [phone]
www.bellgossett.com