Submittal Sheet

A - 135H
SERIES PL - Permanently Lubricated Booster Pumps
Dimensions are approximate and subject to change. Contact factory for certified dimensions.
TYPICAL SPECIFICATIONS
The contractor shall furnish and install inline pumps as
illustrated on the plans and in accordance with the
following
specifications:
1. The pumps shall be of the horizontal, permanently lubricated
type, specifically designed and guaranteed for quiet
operation.
2. The pumps shall have a steel shaft supported by
permanently lubricated, sealed precision ball bearings. The
pumps are to be equipped with a water-tight seal to prevent
leakage. Mechanical seal faces to be carbon on silicon carbide.
The motor shall be non-overloading at any point on the pump
performance curve.
3. The motor shall be of the drip-proof, sealed precision ball-
bearing, quiet-operating construction. The permanent split-
capacitor motor shall be equipped with thermal overload
protection.
4. Pumps to be suitable for 225°F (107°C) operating
temperature at 150 psig (10 bar) working pressure.
The pumps shall be Bell & Gossett, A Xylem brand. Model No.
PL-__________ with a capacity of __________ GPM at
__________ feet of head.
PERFORMANCE CHARACTERISTICS CURVES
Xylem Inc.
8200 N. Austin Avenue
Morton
Grove, IL 60053
Phone: [phone]
Fax: [phone]
www.xyleminc.com/bellgossett
Bell & Gossett is a trademark of Xylem Inc. or one of
its subsidiaries.
© 2019 Xylem Inc.
DIMENSIONS AND WEIGHTS