Submittal Sheet

SUBMITTAL
A-135H
JOB: REPRESENTATIVE:
UNIT TAG:
ORDER NO. DATE:
ENGINEER:
SUBMITTED BY: DATE:
CONTRACTOR:
APPROVED BY:
DATE:
Note: Where potable water is pumped, use a lead-free
†
bronze booster.
PL boosters equipped with a drip-proof motor are recommended for indoor use only.
Permanently Lubricated
Iron & Lead-Free
†
Bronze Booster Pumps
DESCRIPTION
The Series PL™ close coupled booster pumps are specifically
designed for quiet
operation in hydronic, radiant and geothermal
heating and cooling systems. These inline permanently lubricated
pumps are available in cast iron or lead-free
†
bronze body
construction.
OPERATING DATA
Maximum working Pressure: 150 psi (10 Bar)
Maximum Operating Temperature: 225°F (107°C)
†
Contains less than 0.25% Lead content by weight on wetted surfaces.
CONSTRUCTION MATERIALS
Booster Body: Cast Iron or Lead-Free
†
Bronze
Face Plate: Stainless Steel
Impeller:
PL-55, PL-100, PL-130, PL-130 are Glass Filled PPS
PL-30, PL-36, PL-45, PL-50, PL-75, are 30% Glass Filled Noryl®
Shaft: PL-55, PL-100, PL-130, PL-130 are Stainless Steel
PL-30, PL-36, PL-45, PL-50, PL-75, are Carbon Steel with Stainless Steel Sleeve
Seal: Mechanical, Carbon on Silicon Carbide
Elastomers: EPDM
Motor Bearings: Sealed Precision Steel Ball Bearing
Permanently Lubricated Motor Type: ODP