Brochure

Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries.
© 2019 Xylem Inc. A-142G July 2019
Xylem Inc.
8200 N. Austin Avenue
Morton Grove, Illinois 60053
Phone: [phone]
Fax: [phone]
www.xylem.com/bellgossett
Series PL
A Superior Alternative to Wet Rotor Pumps
Specifications
* 230/60/1 motors available upon request. Models PL-75 and PL-130 have four bolt hole flange connection, all others have two bolt hole flange connectors.
Dimensions are approximate and subject to changes. Contact factory for certified dimensions.
Cast Iron Lead Free
FlangeSizes
Inches - NPT
Motor Characteristics* Dimension Inches (mm)@ 60Hz
Approx.
Shpg. Wt.
lbs (Kg)
Model
Number
Part
Number
Model
Number
Part
Number
HP Ø Voltage RPM A B C D E
PL-30 1BL012 PL-30B
1BL013LF 3/4”, 1”, 1-1/4”, 1 1/2” 1/12th
1 115
2650 8-5/8” (219) 6-3/8” (162) 7-1/8” (181) 4-3/16” (106) 4-3/8” (111) 11.6 (5.3)
PL-36 1BL001 PL-36B 1BL003LF 3/4”, 1”, 1-1/4”, 1 1/2” 1/6th 3300 8-5/8” (219) 6-3/8” (162) 7-1/8” (181) 4-3/16” (106) 4-3/8” (111) 13.1 (6.0)
PL-45 1BL002 PL-45B 1BL004LF 1”, 1-1/4”, 1-1/2” 1/6th 3300 9-1/8” (232) 8-1/2” (216) 7-1/4” (184) 4-5/8” (117) 4-1/2” (114) 14.5 (6.6)
PL-50 1BL016 PL-50B 1BL017LF 1”, 1-1/4”, 1-1/2” 1/6th 3300 9-1/8” (232) 8-1/2” (216) 7-1/4” (184) 4-5/8” (117) 4-1/2” (114) 14.5 (6.6)
PL-55 1BL032 PL-55B 1BL068LF 3/4”, 1”, 1-1/4”, 1 1/2” 2/5th 3250 9-9/16 (243) 6-3/8” (162) 7-15/16” (202) 4-3/16” (106) 4-3/4” (121) 13.1 (6.0)
PL-75 1BL034 PL-75B 1BL035LF 2” 1/6th 3400 9-15/16 (252) 8-1/2” (216) 7-3/8” (187) 5-3/16” (132 4-5/8” (117) 18.5 (8.4)
PL-100 1BL134 PL-100B 1BL136LF 1”, 1-1/4”, 1-1/2” 2/5th 3250 9-1/8” (232) 8-1/2” (216) 7-1/4” (184) 4-5/8” (117) 4-1/2” (114) 14.5 (6.6)
PL-130/ 2” 1BL063 PL-130B/ 2” 1BL065LF 2” 2/5th 3200 10-3/4” (273) 8-1/2” (216) 8-1/4” (210) 5-3/16” (132 5-1/8” (130) 22 (10)
PL-130/ 3” 1BL070 PL-130B/ 3” 1BL072LF 3” 2/5th 3200 10-3/4” (273) 8-1/2” (216) 8-1/4” (210) 6” (130) 5-1/8” (130) 27 (12.2)
PL-50
PL-55
PL-75
PL-130
PL-45
PL-36
PL-30
PL-100
Operating Data
Maximum Working Pressure: 150 PSI (10.3 bar)
Maximum Operating Temperature: 225°F (107°C)
Materials of Construction
Pump Body: Cast Iron or Lead-Free* Bronze
Face Plate: Stainless Steel
Impeller: PL-55, PL-100 and PL-130 are Glass Filled PPS.
PL30, PL-36, PL-45, PL-50, PL-75 are 30% Glass Filled Noryl®
Shaft : PL-55, PL-100 and PL-130 are Stainless Steel.
PL30, PL-36, PL-45, PL-50, PL-75 are Carbon Steel with a
Stainless Steel Shaft Sleeve
Seal: Mechanical, Carbon on Silicon Carbide
Motor Bearings: Sealed Precision Steel Ball Bearing
Permanently Lubricated
Motor Type: ODP Elastomers: EPDM
*CSA certied to NSF/ANSI 372 that product contains less than 0.25% lead
content by weight on wetted surface.
Description
The Series PL close coupled booster pumps are specifically
designed for quiet operation in hydronic, radiant and
geothermal heating and cooling systems. These inline
permanently lubricated pumps are available in cast iron or
lead-free* bronze body construction.