Replacement Parts List

How to use this
PARTS LIST
The pump nameplate identifies the pump by model number, pump construction and
impeller diameter as shown below.
The nameplate above identifies the pump as a Series 60, 1
1
/4AA in bronze fitted (BF)
construction. The impeller diameter is 4
3
/8" and is capable of pumping 21 GPM at 14
FT. The motor horsepower is
1
/4, the RPM is 1750. The serial number specifically identi-
fies the unit for future reference. DO NOT REMOVE THE NAMEPLATE. It is important
when ordering replacement parts to furnish complete nameplate data.
The following procedure will result in proper parts selection.
1. Determine from the nameplate the model number, pump construction and impeller
diameter.
2. Refer to the index for the page number of the parts breakdown for the specific
model pump.
3. Find the proper column in the parts breakdown for the pump construction involved.
4. Select part numbers using the numbered drawings on pages 4 & 5 for identification.
B
ELL & GOSSETT
PUMP

S
IZE
P
UMP
CAP. 
MOTOR
C
AP. 
SERIAL
NO. 

60
1
1
/4 AA 4
3
/8 BF
21 GPM 14 FT
1
/4HP 1750RPM
1598200 A19
CSA
ENCL
2
Pump Model Number
Capacity & Head
Motor
Horsepower
Impeller
Diameter
Pump Series
Pump Construction
Serial Number
Date Manufactured (January, 1991)
®
PARTS LIST CP 105H-PL SERIES 60 SLEEVE BEARING PUMPS
3