Replacement Parts List

24
CENTRIFUGAL PUMP REPLACEMENT PARTS HS-300F-PL
How to Select Parts for Series 60 &
1522 Pumps on Pages 25-34
The pump nameplate identifies the pump by model number, pump construction and
impeller diameter as shown below.
The nameplate above identifies the pump as a Series 60, size 1
1
/4AA in bronze-fitted (BF)
construction. The impeller diameter is 4
3
/8" and is capable of pumping 21 GPM at 14 FT.
The motor horsepower is
1
/4, the RPM is 1750. The serial number specifically identifies
the unit for future reference. DO NOT REMOVE THE NAMEPLATE. It is important when
ordering replacement parts to furnish complete nameplate data.
Following the procedure below will result in proper parts selection.
1. Determine from the nameplate the model number, pump construction and impeller
diameter.
2. Refer to the index for the page number of the parts breakdown for the specific model
pump.
3. Find the proper column in the parts breakdown for the pump construction involved.
4. Select part numbers using the numbered drawings on pages 5, 6 & 7 for identification.
BELL & GOSSETT PUMP
SIZE
PUMP
CAP.
MOTOR
CAP.
SERIAL
NO.
60
1
1
/ 4 AA 4
3
/ 8 BF
1
/ 4 HP 1750RPM
21 GPM 14 FT
1598200 A19
CSA
ENCL
2
Impeller
Diameter
Pump Series
Pump Model Number
Pump Construction
Date Manufactured (January, 1991)
(See complete date code list on
page 8.)
Serial Number
Motor
Horsepower
Capacity & Head