Submittal Sheet

Bell & Gossett
SUBMITTAL
A-356
JOB: REPRESENTATIVE:
UNIT TAG: ORDER NO. DATE:
ENGINEER: SUBMITTED BY: DATE:
CONTRACTOR:
APPROVED BY:
DATE:
SCHEDULE
TYPICAL SPECIFICATIONS
ZoneTrol
™
Zone Valve Controller
DESCRIPTION
A ready-to-install controller for zone valves in hydronic systems.
ZoneTrol zone valve controllers are available to accommodate up
to six zone valves. The zone valve controllers feature 40 VA
transformer (four zone) or 75 VA transformer (six zone), a socket
mounted plug-in/plug-out relay, switchable priority, two isolated
end switches rated at 10 amps and LED diagnostic lights. The
units are operated by two-wire 24 volt thermostats and are
compatible with most 3 or 4 wire, 24 volt zone
valves.
CONSTRUCTION
The ZoneTrol zone valve controllers are solidly constructed, wall
mounted units featuring printed circuit board design, 40 VA
transformer (four zone) or 75 VA transformer (six zone),
replaceable plug-in style relays, and light emitting diode (LED)
indicators to signal zone valve operation.
PART NO. MODEL NO.
MAX NO. OF
ZONES
DIMENSIONS
W x H x D
INCHES (mm)
APPROX.
SHPG. WT
LBS
TAGGING INFORMATION QUANTITY
109407 ZTV-4 4 9-1/4 x 7-1/4 x 2-3/4 4.6
109408 ZTV-6 6 11-3/8 x 7-1/4 x 3-3/4 6.9
Furnish and install zone valve controllers(s) as shown on plans.
The Controller(s) shall be suitable for operation o
f
_
____________ zone valves. Controller shall include a nominal
(40 VA or 75 VA) transformer, socket mounted interchangeable
plug-in/plug out relays, two isolated end switches rated for 10
amps, screwless terminals, and a prewired printed circuit board.
The zone valve controller shall be Bell & Gossett Model ZTV-___.
Bell & Gossett
8200 N. Austin Avenue, Morton Grove, IL 60053
Phone [phone]
Facsimile [phone]
www.bellgossett.com
© COPYRIGH
T 2003 INDUSTRIES, INC.