Replacement Parts List

16
CENTRIFUGAL PUMP REPLACEMENT PARTS HS-300D-PL
How to Select Parts for Maintenance
Free Series 60, Pages 17-23
The pump nameplate identifies the pump by model number, pump construction and
impeller diameter as shown below.
The BTO nameplate above identifies the pump as a Series 60, size 1
1
/4x5
1
/4 in bronze
fitted (BF) construction. The impeller diameter is 4
1
/4" and is capable of pumping 30
GPM at 15 FT. The motor horsepower is
1
/4, the RPM is 1750. The serial number specifi-
cally identifies the unit for future reference. DO NOT REMOVE THE NAMEPLATE. It is
important when ordering replacement parts to furnish complete nameplate data.
Following the procedure below will result in proper parts selection.
1. Determine from the nameplate the model number, pump construction and impeller
diameter.
2. Refer to the index for the page number of the parts breakdown for the specific
model pump.
3. Find the proper column in the parts breakdown for the pump construction involved.
4. Select part numbers using the numbered drawings on page 4 for identification.
NAMEPLATE FOR
BUILT-TO-ORDER PUMPS
NAMEPLATE FOR
STOCK PUMPS