Product Brochure
Step-less speed dial with specic
LED color for each operating mode
Technical Data
Motor design Shaft-less spherical motor using permanent
magnet technology for improved efficiency
Maximum System Pressure 150 PSI (10 bar)
Maximum Fluid Temperature 203°F (110°C)
Minimum Fluid Temperature 14°F (-10°C)
Electrical Supply 115 Volt, 60 Hertz, 1 Phase
Suitable for the following liquids water/glycol mixtures*
Power Consumption 4 – 60 Watts
Protection IP 44
Insulation Class F
* Check hydraulic performance with more than 20% glycol
RELIABILITY
•
EFFICIENCY
•
SIMPLICITY
Simplicity
The only moving part is the rotor/impeller unit.
The shaft, shaft seals and conventional bearing
bushings have been eliminated. The rotor/
impeller has Anti-Block Technology.
The Anti-Block Technology separates the main
ow of the pumped media completely from
the permanent magnetic parts. It is virtually
impossible for the ecocirc 19-16 to block-up
even in an old open system.
Higher Efficiency & Improved Performance
The motor is provided with precise frequency and
voltage for optimum performance. The permanent
magnet motor eliminates the need for input
power to magnetize the rotor allowing the motor
to deliver superior starting torque and energy
efciency compared to standard induction
motor circulators.
The Perfect Balance of
Always easy to access. The screw ring design results in a pump motor
that can be rotated in any position around the 360° circle. Therefore the
electrical connection as well as the control dial is easy to access.
Magnetically centered
spherical impeller/rotor
High efciency
ECM motor
3
Check Valve