User manual

25
Using the Belkin Wireless Networking Utility
section
25
1
2
3
4
5
6
The client will be automatically enrolled into your wireless network within
two minutes.
If desired, you may connect manually to a WPS-enabled network. Click
on the “Advanced” tab to open the following window:
Enter in the encryption key and security method in order to join this
network. The following section describes how to connect to a secure
network that does not support WPS.
To connect to a secure network, you will first need to determine which
standard is used by the router (or access point). (See your wireless
router’s or access point’s manual for directions on how to access the
security settings.)