Notebook Card User Manual F5D9010

23
Using the Belkin Wireless Client Utility
23
section
1
2
3
4
5
6
WPA (with server) Settings
Choose this setting if your network uses a radius server to distribute
keys to the clients (network cards). WPA (with server) is typically used
in business networks.
1. From the “Security Mode” drop-down menu, select “WPA
(with Radius Server)”.
2. Enter the IP address of the radius server into the “Radius
Server” fields.
3. Enter the radius key into the “Radius Key” field.
4. Enter the re-key interval. The re-key interval is how often the keys
are distributed (in packets).
5. Click “Apply Changes” to finish. You must now set all clients
(network cards) to match these settings.
IMPORTANT: You must now set all wireless network cards/adapters
to match these settings.