Operation Manual

27
27
1
2
3
4
5
6
section
WPA (with server) Settings
Choose this setting if your network uses a radius server to distribute
keys to the clients (network cards). This is typically used for a
business network.
1. From the Security Mode drop-down menu, select “WPA (with
server)”.
2. Enter the IP address of the radius server into the “Radius
Server” fields.
3. Enter the radius key into the “Radius Key” field.
4. Enter the key interval. The key interval is how often the keys are
distributed (in packets).
5. Click “Apply Changes” to finish.
IMPORTANT: You must now set all wireless network cards/adapters
to match these settings.
Using the Belkin Wireless LAN Utility