Operation Manual

2726

WPA-PSK (no server)

Choose this setting if your network does not use a radius server.

WPA-PSK (no server) is typically used in home and small

office networking.

1. From the Security Mode drop-down menu, select “WPA-PSK

(no server)”.

2. Enter your network key. This can be from 8 to 63 characters and

can be letters, numbers, or symbols. This same key must be used

on all of the clients (network cards) that you want to include in

your network.

3. Click “Apply Changes” to finish. You must now set all clients

(network cards) to match these settings.

Using the Belkin Wireless LAN Utility