Powerline AV Networking Adapter User Manual PM01146ea-A F5D4074v2
Table of Contents Table of Contents sections 1 2 1 Introduction ��������������������������������������������������������������������������������������� 1 3 4 2 Installing and Setting Up the Adapters. . . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Table of Contents sections 1 2 3 4 Thank you for purchasing the Powerline AV Networking Adapter (the Adapter). Most people don’t enjoy buying long and expensive Ethernet cables or pulling the cables from one place to another, but the Adapter offers one of the easiest ways to enjoy home or small-business networking. Users can now experience a total network solution with the Adapter.
Introduction Table of Contents sections 1 2 Features • Up to 200Mbps* bandwidth over standard home power lines • HomePlug signal easily passes through circuit breaker • 128-bit AES encryption ensures data security • Encryption completed by hardware, without sacrifice to bandwidth • Uses IEEE 802.3 computer interface • Plug-and-play installation • xtendnet™ feature for a robust powerline network • HomePlug Powerline AV-compliant • Coexistence with HomePlug 1.0 and 1.
Introduction Table of Contents sections 1 2 Product Specifications Computer Interface: IEEE 802.3/802.3u Operating Temperature: 32–104 degrees F (0–40 degrees C) Storage Temperature: -4–176 degrees F (-20–80 degrees C) Humidity: Max. 5%–90% (non-condensing) *The standard transmission rate—200Mbps—is the physical data rate. Actual data throughput will be lower.
Introduction Table of Contents sections 1 2 Power LED 3 System Requirements Solid Green Power on Off Power off Blinking Green Encryption setting up Solid Green Encryption setup successful Double Flash Fail in encryption • • • • • At least 2 HomePlug devices Available Ethernet port on each computer or network device Available power outlet Standard home powerline wiring CD-ROM drive Package Contents Powerline Link LED • Two Powerline AV Networking Adapters Blinking Powerline data trans
Installing and Setting Up the Adapters Table of Contents sections 1 2 Overview 3 4 Hardware Setup Installation of the Powerline AV Networking Adapter takes only seconds and does not require setting up long wires throughout the house. Simply plug the units directly into any available wall outlet and connect to any device with an Ethernet port. Users have the option to randomly change the security password for their powerline network. 1.
CONFIGURATION Table of Contents sections 1 2 3 4 Overview Changing the Network Password The Adapter uses 128-bit AES encryption to block access from the outside. By default, the protection is enabled. However, it is recommended that you change the default network password with the “Encryption” button located on the units. 1. With both Adapters plugged into the wall, press the “Encryption” button on both units for 10 seconds. The password on these Adapters has now been changed to a random value.
CONFIGURATION Table of Contents sections 1 2 3 4 Adding Another Adapter to the Network Resetting to Factory Defaults 1. If the default network password has been changed, a new Adapter will have to load the new password before it can join the network. Using a pointed object, press and hold the “Reset” button for one second to restore defaults. This procedure resets the network password to the default out-of-box value. 2.
CONFIGURATION Table of Contents sections Free Tech Support* 1 *National call rates may apply 2 www.belkin.com You can find additional support information on our website www.belkin. com through the tech‑support area. If you want to contact technical support by phone, please call the number you need from this list*. Powerline AV Networking Adapter 8 3 4 Country Number Internet adress AUSTRIA 0820 200766 www.belkin.com/de/networking/ BELGIUM 07 07 00 073 www.belkin.com/nl/networking/ www.
information Table of Contents sections 1 2 3 4 FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the device, This equipment generates, uses, and can radiate radio frequency energy.
information Table of Contents sections 1 2 3 4 Belkin International, Inc., Limited Lifetime Product Warranty What this warranty covers. What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
information Table of Contents sections 1 2 3 4 How state law relates to the warranty. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.
Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom Belkin SAS 130 rue de Silly 92100 Boulogne-Billancourt, France Belkin GmbH Hanebergstrasse 2 80637 Munich Germany Belkin Iberia C/ Anabel Segura, 10 planta baja, Of. 2 28108, Alcobendas, Madrid Spain Belkin Italy & Greece Via Carducci, 7 Milano 20123 Italy Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, Netherlands © 2009 Belkin International, Inc. All rights reserved.
