User manual

20 | Chapter 2. Using the XAV5001 Powerline Utility
XAV5001 Powerline AV 500 Adapter User Manual
Return to the Default Network Encryption Key
1. Make sure your Powerline XAV5001 adapter is connected to an AC power outlet.
2. Start the X
AV5001 Powerline Utility, click the Refresh button, and wait for the utility to detect
the devices in your Powerline network.
Note: Before you can reset a remote device, you must enter its password.
The password is printed on the product label located on the back of
the adapter.
3. Click the Security icon
and select Security from the pop-up menu.
4. Select the check box next to any Powerline device you want to return to the default
Encryption Key.
5. Click the Use Default Encryption Key button.
The default encryption key, HomePlugAV, displays in the encryption field.
6. Click Apply Security to Selected Devices.
When completed, the utility displays a message indicating that the operation was
successful.
7. Click OK.