User manual

14 | Chapter 2. Using the XAV5001 Powerline Utility
XAV5001 Powerline AV 500 Adapter User Manual
Figure 5. Powerline Utility main screen
Note: The Information box at the bottom of the screen provides tips and
information for using this utility page.
From the Powerline Utility screen, you can do the following:
• Change the Name of a Powerline Device
• Turn LEDs On or Off
• Set Encryption Keys
• Set Up Quality of Service (QoS)
• Reset a Device to Factory Settings
Change the Name of a Powerline Device
Powerline devices are identified in the Powerline network by the model number and name.
Any Powerline devices that are plugged in and connected are detected by the Powerline
Utility, and shown on the Powerline Utility main screen. If no name has been assigned to a
Powerline device, the device is shown as un-named.