XAV5001 Powerline AV 500 Adapter User Manual 350 East Plumeria Drive San Jose, CA 95134 USA January 2011 202-10708-01 v1.
XAV5001 Powerline AV 500 Adapter User Manual ©2011 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com.
Contents Chapter 1 Installation and Basic Configuration How the Powerline AV 500 Adapter Fits in Your Network . . . . . . . . . . . . . . 4 XAV5001 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 XAV5001 Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED and Feature Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Your Powerline AV 500 Adapter . . . . . . . . . . . . .
1. Installation and Basic Configuration 1 This chapter describes how to install and configure the XAV5001 Powerline AV 500 Adapter. It also explains the security features and how to customize the encryption key for added security. For more information on the topics covered in this manual, visit the Support website at http://support.netgear.com.
XAV5001 Powerline AV 500 Adapter User Manual XAV5001 Features The following illustration shows the front and side panels of the XAV5001: LEDs Security button Factory Reset button Figure 2.
XAV5001 Powerline AV 500 Adapter User Manual Table 1. XAV5001 LED Descriptions Item Description Power LED • Solid green. The electrical power is on. • Blinking green.The adapter is in the process of restarting or setting up security. • Amber. Power saving mode. The unit enters power saving mode if the Ethernet port is not linked for more than 10 minutes. • Off. There is no electrical power, or power has been turned off through the Powerline utility. Powerline LED • Solid.
XAV5001 Powerline AV 500 Adapter User Manual Installing Your Powerline AV 500 Adapter Prepare for Installation: 1. Before you begin, verify the following: • Your Ethernet network is set up. • An Ethernet port is available on your router. • Your Internet connection is working. • An Ethernet port is available on each computer that will use a Powerline AV Ethernet Adapter and is configured to work on your network. Usually, the default configuration settings (TCP/IP and DHCP) are fine. 2.
XAV5001 Powerline AV 500 Adapter User Manual Connecting an XAV5001 Adapter to the Router 1. Plug an XAV5001 adapter into a power outlet near your router. Use the supplied gray Ethernet cable to connect from the XAV5001 adapter to a LAN port on your router so that the Powerline network can gain access to the Internet. The Power and Ethernet LEDs on the Powerline adapter should turn on. Note: It is not necessary to disconnect your router from your computer.
XAV5001 Powerline AV 500 Adapter User Manual Adding Adapters to Your Network Once the first adapter is installed and connected to your router, you can easily add adapters into your network. To add Powerline adapters: 1. Be sure the first Powerline adapter is connected to your router. 2. Plug additional Powerline adapters into power outlets near the other computers and additional peripheral devices to be included in your Powerline network. 3.
XAV5001 Powerline AV 500 Adapter User Manual Understanding Powerline Network Security A Powerline network consists of two or more Powerline adapters using the same network encryption key. Securing your network is crucial. By encrypting the information you send over the Powerline AV Ethernet Adapter, you help to keep it secure from hackers.
XAV5001 Powerline AV 500 Adapter User Manual To set a private encryption key: 1. Verify that all the Powerline AV Ethernet Adapters to be configured are plugged in. 2. On the first Powerline AV Ethernet Adapter, press its Security button for 2 seconds. The power LED starts blinking after you release the button. The adapter automatically produces a new, randomly generated network encryption key that each Powerline adapter will use.
2. Using the XAV5001 Powerline Utility 2 This chapter explains how to install and use the XAV5001 Powerline Utility. The Powerline Utility works with all Powerline AV products. All Powerline AV products (models XAV101, XAV101v2, XAV1004, XAV1501, XAV2001, XAV2501, XAVN2001, XAV5501, and XAV5004) are compatible and can share the same powerline network.
XAV5001 Powerline AV 500 Adapter User Manual The Welcome screen displays: 6. Click Next, follow the wizard prompts, and click Finish when the wizard is done. The Powerline Utility shortcut icon appears on your desktop: 7. There are two ways to launch the Powerline Utility: • Click the Powerline Utility shortcut icon located on your desktop.
XAV5001 Powerline AV 500 Adapter User Manual Figure 5. Powerline Utility main screen Note: The Information box at the bottom of the screen provides tips and information for using this utility page.
XAV5001 Powerline AV 500 Adapter User Manual To name any Powerline device in your Powerline network: 1. From the Powerline Utility main screen, click the device you want to name, and the following pop-up menu appears:. 2. Click Device Name. The utility responds that connectivity will be temporarily lost if you continue. 3. Click OK. The following screen displays: 4. Enter a new name for the Powerline device, and click OK.
XAV5001 Powerline AV 500 Adapter User Manual To set the Encryption Key for the Powerline network: 1. Click the Powerline device icon or the Security icon screen. on the Powerline Utility main 2. On the pop-up menu, click Security. The following screen displays: Figure 6. Security Screen 3. Select the check box for each Device Name for which you want to set the encryption key. 4. In Step 2 on your screen, you have two options: • Use the Default Encryption Key option.
XAV5001 Powerline AV 500 Adapter User Manual By default, all types of traffic on the Powerline network are assigned the same priority. For most applications, this works fine. However, there are situations where performance improves if you assign a higher priority to certain types of traffic, such as multimedia files. To prioritize by general application type: If your network traffic is a mix of multimedia and document/database traffic you might want to give priority to a particular traffic type.
XAV5001 Powerline AV 500 Adapter User Manual 3. To set the traffic prioritization rule into the selected Powerline adapter device, specify the priority in the QoS Setup section of the screen. 4. Click Apply. Note: QoS settings are applied only to the selected device. These options only apply to QoS-configured business networks. IEEE 802.1p uses prioritization bits in Layer-2 frames. Type of Service routing (ToS) uses prioritization bits in Layer-3 IP packets. The deprecated ToS values range from 0 to 7.
XAV5001 Powerline AV 500 Adapter User Manual • You can use the XAV5001 Powerline Utility to add the new device to the network, as described in the following sections. The procedure for setting the network encryption key depends on whether the computer running the XAV5001 Powerline Utility is connected directly to the new Powerline adapter (local) or is connected to a different device in the Powerline network (remote). To add a device from a locally connected computer: 1.
XAV5001 Powerline AV 500 Adapter User Manual Return to the Default Network Encryption Key 1. Make sure your Powerline XAV5001 adapter is connected to an AC power outlet. 2. Start the XAV5001 Powerline Utility, click the Refresh button, and wait for the utility to detect the devices in your Powerline network. Note: Before you can reset a remote device, you must enter its password. The password is printed on the product label located on the back of the adapter. 3.
3. Troubleshooting 3 This chapter provides information about troubleshooting your XAV5001 Powerline AV 500 Adapter. Product Registration and Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Registration via our website is strongly recommended.
XAV5001 Powerline AV 500 Adapter User Manual LED Troubleshooting Tips Table 1. LED and Feature Troubleshooting Table 2. Problem Recommendation Power LED is off. Make sure that power is supplied to the electrical outlet, and the Powerline device is not plugged into an extension cord, power strip, or surge protector. Power LED is amber. The adapter enters power saving mode if the Ethernet port is not linked for more than 10 minutes. It goes back to normal mode when the Ethernet port is linked.
XAV5001 Powerline AV 500 Adapter User Manual Problems after Changing the Network Encryption Key If your Powerline devices stop communicating after you have used the NETGEAR XAV5001 Powerline Utility, it is probably because the encryption key is not the same for every Powerline device on your Powerline network. To fix this problem: 1. Make sure all Powerline devices are plugged in. 2.
A. Supplemental Information A This appendix provides technical specifications and safety information for the XAV5001 Powerline AV Ethernet Adapter. Technical Specifications Network Protocol and Standards Compatibility Data and routing protocols: IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-Tx), IEEE 802ab 100BASE-T AC input 100–240V~, 0.2A (Max) Power consumption: 5W Dimensions: Height: 98 mm Width: 72 mm Depth: 40 mm Weight: 0.4 lbs (0.
XAV5001 Powerline AV 500 Adapter User Manual Frequency band: 1.8 – 68.5 Mbps Modulation type: OFDM symbol modulation Electromagnetic Emissions Meets requirements of: FCC Part 15 Class B; CE-EMC Class B; 3-home FCC Certificate; HomePlug AV, IEEE 1901 Safety Agency Approvals Meets requirements of: UL Listed (UL 1950) /cUL IEC950; CE LVD; TUV CB; GS Safety Information Follow these safety guidelines to ensure your own personal safety and to help protect your system from potential damage.
XAV5001 Powerline AV 500 Adapter User Manual • Operate the product only from the type of external power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your service provider or local power company.
B. Notification of Compliance NETGEAR Powerline Products B Safety Instructions and Precautions WARNING! Use the following safety guidelines to ensure your own personal safety and to help protect your product from potential damage. To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following precautions. • The socket-outlet shall be installed near the equipment and shall be easily accessible • Observe and follow service markings.
XAV5001 Powerline AV 500 Adapter User Manual The voltage and current rating of the cable should be greater than the ratings marked on the product. • To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets. • Do not use adapter plugs. If you must use an extension cable, use a three-wire cable with properly grounded plugs. • Observe extension cable and power strip ratings.
XAV5001 Powerline AV 500 Adapter User Manual FCC Declaration Of Conformity We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the Powerline AV 500 Adapter (XAV5001) complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
Index A H add a device, local 18 add adapters 9 humidity operating, storage 24 B I bandwidth 24 basic configuration 4 basic functioning 21 button descriptions 5 install Powerline adapter 7 Powerline utility 12 L C compatibility 24 compliance 27 customer support 21 D data transfer rate 24 default encryption key 19 dimensions 24 E electromagnetic emissions 25 encryption key default 19 set 10 encryption type 24 ethernet network extension 4 F features 5 frequency band 24 front panel 5 LED descriptio
XAV5001 Powerline AV 500 Adapter User Manual T technical specifications 24 technical support 2 temperature 24 trademarks 2 troubleshooting 21 U UL listed 25 W weight 24 X XAV5001 features 5 install 7 Index | 31
