User manual

P75598- Belkin OmniView Serial Console
2.2 LED Indicators, Button, and Connectors
LED Indication
Power
Red – power indication
ON: power is applied
Link
Ethernet Link/Act/10/100Mbps:
Orange -- 10BaseT Ethernet connection
established
Green -- 100BaseT Ethernet connection
established
Blinking: when data in activity
ON: when no data in activity and link connected
Ready
Green -- blinking per second when system is ready
Port Activity
(one LED per
port)
Blue – traffic activity
ON: In Use (successful port login)
Blinking: traffic activity on the serial port
 RESET button: Quickly press and release the button to reboot the Serial
Console. Press and hold the Reset button for more than 5sec to set the unit
to its default configuration settings.
 ETHERNET RJ45 connector: Ethernet interface
 CONSOLE RJ45 connector: RS232 console interface
 Other RJ45 connectors: serial ports
2.3 Specifications
Feature Specification
LEDs
Power(Red),
Ready(Green, normally blinking),
General
Link/Act/10/100Mbps(Ethernet Orange:10Mbps, Green:100Mbps)
Activity(Blue for each serial port)
Push button for Reset, or Restore to default
RTC (real time clock)
16-port (F1DP116S)
Serial Port Mode (RS-232)
Serial Connector (RJ-45)
Baudrate (300 to 115200)
Serial Interface
Flow Control (None, RTS/CTS, Xon/Xoff)
RJ-45 connector
IEEE802.3 - 10/100BaseT
LAN Interface
Auto-detecting, Full/Half-duplex selectable
Operation Modes
Console server
Port Function
Terminal server
9 / 66