User manual

P75598- Belkin OmniView Serial Console
Click Browse to search the firmware file from the explorer window.
Navigate through your PC and select firmware file. Click Open to confirm your selection.
Once the appropriate firmware file is selected, click Upgrade to initiate the firmware
upgrade process. The web interface will display the progress bar to indicate the
proceeding of the file transfer. At the same time the port LED on front panel will also blink
in series to indicate the upgrade procedure is in process.
Warning !!! DO NOT disconnect the power or the Ethernet cable during this
upgrading process. Doing sot may cause upgrade failure and destroy the image in
memory.
The Serial Console will automatically initiate a self-reboot upon completion of upgrade
process to activate the new firmware. Once the counter expires, the browser will redirect
you to the login homepage. You can refer to System Status page to check the firmware
version and confirm the upgrade operation.
51 / 66