User manual

P75598- Belkin OmniView Serial Console
Where available the page will allow the user to Apply or Cancel their actions. To apply all
changes, select Apply and the new values will be applied to the configuration.
If you do not want to save the new values, then simply click Cancel and all changes made
will be removed and the previous values restored.
3. Network
You can configure the network IP settings via VT-100 or web interface. This section
describes configuration through the web interface.
3.1 IP Configuration
The Serial Console requires a valid IP address to operate within the user’s network
environment. If the IP address is not readily available, contact the system administrator to
obtain a valid IP address for the Serial Console.
21 / 66