User manual

P75598- Belkin OmniView Serial Console
Dial-in modem
Serial-to-serial (on port 16 only)
TCP, UDP, IP, ARP, ICMP, HTTP/HTTPS, Telnet, DHCP/BOOTP, PPP
SMTP, DNS, NTP
Protocols
Dynamic DNS
TCP Inactivity Time (TCP keep-alive time)
Serial Inactivity Time
Protocol
Relative
Function
Port Monitoring
Password Access
IP Filtering
SSHv2
Security
HTTPS / SSL
Local user database
PAP/CHAP (for modem dial-in)
Authentication
RADIUS
Local Console (menu or command line)
SSH, Telnet
Web pages (HTTP/HTTPS)
Firmware upgrade via Web interface
Port buffering and logging
Management
Full-featured system status display
AC Input (100 ~ 240 VAC, 50 ~ 60 Hz)
Operating Temperature: -10 to 80 °C
Storage Temperature: -20 to 85 °C
Power &
Environment
Humidity: 0 – 90% non-condensing
CE, FCC
Certifications
UL
1U 19” Rack mount
Mechanical
Dimensions (cm): 43.2 x 18.0 x 4.2
Note: Specifications are subject to change without notice.
2.4 Local Installation
Where to place the Console Sever:
The enclosure of the Console Server is designed for stand-alone or rack-mount
configuration. The Console Server can be mounted to a standard 19-inch server rack using
the included rack-mount brackets and screws.
Consider the following when deciding where to place the Switch:
• the location of your target devices in relation to your console
• the lengths of the cables you use to connect your devices to the console
10 / 66