User manual

4
Installation
1
2
3
4
5
6
4
How do I disconnect the Expansion Dock?
1. lf the Expansion Dock is transferring data through one
of its connections, wait until the data has
finished transferring.
2. If you are connected using the Ethernet port, close your
network connection.
3. Disconnect the ExpressCard cable and/or remove the
ExpressCard from the notebook computer.
You can disconnect the Expansion Dock while the computer
is running. However, DO NOT reconnect the Expansion Dock
while the notebook is running. In most notebook computers
this will function correctly, but in a few it will cause a system
error that could require you to reset your computer.
NOTE: lf the video output of the Expansion Dock is
configured in Extended Mode (see “Video Modes”, below)
when you disconnect the Expansion Dock, any open
windows on the external monitor move to the primary
notebook screen. When the Expansion Dock is reconnected
to the notebook, the video output is again configured for
Extended Mode on the external monitor. However, windows
that were previously on the external monitor will stay on the
primary notebook screen.
Video Modes
The Expansion Dock’s video output works in three modes:
• Primary Mode
• Extended Mode
• Mirror Mode
4