Operation Manual

1312

Knowing your Router

section

J. Reset Button

The “Reset” button is used in rare cases when the Router may

function improperly. Resetting the Router will restore the Router’s

normal operation while maintaining the programmed settings. You

can also restore the factory default settings by using the “Reset”

button. Use the restore option in instances where you may have

forgotten your custom password.

i. Resetting the Router

Push and release the “Reset” button. The lights on the

Router will momentarily flash. The “Power/Ready” light will

begin to blink. When the “Power/Ready” light becomes solid

again, the reset is complete.

ii. Restoring the Factory Defaults

Press and hold the “Reset” button for at least 10 seconds,

then release it. The lights on the Router will momentarily

flash. The “Power/Ready” light will begin to blink. When

the “Power/Ready” light becomes solid again, the restore

is complete.

K. Power Jack – Black

Connect the included 12V/1A DC power supply to this jack.

L. Push Button

This button is set aside for the Wi-Fi Protected Setup

™

feature.

Refer to the “Changing the Wireless Security Settings” section for

more details.