User manual

How to Install your KVM
How to Install your KVM | 010
How to Install your KVM
How to Install your KVM | 011
2.5 Using your KVM’s built-in six-foot (1.8m) cable,
connect the VGA connector to the VGA port
on your second computer. Connect the USB
connector to an available USB port and the
speaker connector to the speaker jack.
You are now ready to use your KVM.
Installing Switching Software (optional)
In addition to using the front-panel buttons on KVM, you can also install software onto your
computers that will allow you to use your keyboard or a desktop icon to switch computers.
To install the KVM software on your Mac mini and other computers using Mac OS X v10.3
and above:
1. Insert the KVM CD into your CD-ROM drive.
2. Wait for the “ KVM” window to appear on your desktop
and then double-click on “start.osx”.
3. Select “Install” and follow the instructions.
4. Once the software is successfully installed, the icon will appear in the menu bar in
the upper-right corner of your screen.
To install the KVM software on computers using Windows 2000 or XP:
1. Insert the KVM CD into your CD-ROM drive.
2. Wait for the CD to auto-load. If it does not auto-load, access your CD-ROM drive and
locate the “Setup.exe” fi le on the CD. Double-click on the “setup” icon.
3. Select “Install” and follow the instructions.
4. Once the software is successfully installed, the icon will appear in the taskbar in the
lower-right corner of your screen.