Operation Manual

Using the Web-Based Advanced User Interface
53
section
2
1
3
4
5
6
7
8
9
10
WEP Setup
64-Bit WEP Encryption
1.
Select “WEP” from the “Security” menu’s “Allowed Client Type”.
2.
Select “64-bit” as the WEP mode.
3.
After selecting your WEP encryption mode, you can enter your
key by typing in the hex key manually, or you can put a check
mark in “Passphrase”, then type in your passphrase. Click “Apply
Changes” to generate four different hex keys.
A hex (hexadecimal) key is a combination of numbers and letters
from A–F and 0–9. For 64-bit WEP, you need to enter 10 hex keys.
For instance: AF 0F 4B C3 D4 = 64-bit WEP key
4.
Select the “Default Key ID” from the drop-down menu.
WARNING:
If you are configuring the Wireless G Router or access
point from a computer with a wireless client, you will need to ensure
that security is turned ON for this wireless client. If this is not done,
your client will lose its wireless connection.