Operation Manual

Using the Web-Based Advanced User Interface

Configuring the Wireless Network Settings

Clicking on the header of the “Wireless” tab will take you to the

“Wireless” header page. From this page, the Router’s wireless radio

can be enabled or disabled (the default setting is enabled). Under the

“Wireless” tab, there are links that allow you to make changes to the

wireless network settings.

(1)

(2)

Changing the Wireless Network Name (SSID)

To identify your wireless network, a name called the SSID (Service

Set Identifier) is used. The default SSID of the Router is “belkin54g”.

You can change this to anything you want to or you can leave it

unchanged. If there are other wireless networks operating in your

area, you will want to make sure that your SSID is unique (does not

match that of another wireless network in the area). To change the

SSID, type in the SSID that you want to use in the “SSID” field

(1)

and

click “Apply Changes”

(2)

. The change is immediate. If you make a

change to the SSID, your wireless-equipped computers may also need

to be reconfigured to connect to your new network name. Refer to the

documentation of your wireless network adapter for information on

making this change.