Operation Manual

34
Alternate Setup Method
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]. Some ISPs require a connection using
PPTP protocol, a type of connection most common in European
countries. This sets up a direct connection to the ISP’s system. Type
in the information provided by your ISP in the space provided. When
you have finished, click “Apply Changes”
(9)
. After you apply the
changes, the “Internet Status” indicator will read “connection OK” if
your Router is set up properly.
1. User ID
Provided by your ISP. Enter your PPTP User ID here.
2. Password
Type in your password and retype it into the “Retype Password”
box to confirm it.
3. PPTP Gateway
Provided by your ISP. Enter your PPTP Gateway/service IP
address here.
(1)
(2)
(3)
(4)
(5)
(6)
(7)