Operation Manual

Alternate Setup Method

Step 2 Set up your Computer’s Network Settings to Work

with a DHCP Server

See the section in this User Manual called “Manually Configuring

Network Settings” for directions.

Step 3

Configure the Router Using the Web-Based

Advanced User Interface

Using your Internet browser, you can access the Router’s Web-Based

Advanced User Interface. In your browser, type “192.168.2.1” (you do

not need to type in anything else such as “http://” or “www”). Then

press the “Enter” key.

PLEASE NOTE:

If you have difficulty accessing the Router’s

Web-Based Advanced User Interface, go to the section entitled

“Manually Configuring Network Settings”.

Logging into the Router

You will see the Router’s home page in your browser window. The

home page is visible to any user who wants to see it. To make any

changes to the Router’s settings, you have to log in. Clicking the

“Login” button or clicking on any one of the links on the home page

will take you to the login screen. The Router ships with no password

entered. In the login screen, leave the password blank and click the

“Submit” button to log in.

Advanced User Interface