TuneCommand for iPod ™ ® Wirelessly control your tunes anywhere EN User Manual F8Z024ea P74852_F8Z024_uk.
P74852_F8Z024_uk.
Introduction Designed to let you roam and play your tunes from virtually anywhere in your home, the TuneCommand for iPod from Belkin delivers the flexibility and convenience that iPod users desire. Using wireless radio frequency technology, TuneCommand works from up to 120 ft. / 37 m. away from your stereo. Please review this User Manual carefully so that you can be sure to get the most from your TuneCommand. P74852_F8Z024_uk.
What’s in the Box TuneCommand Receiver for iPod Multi-Clip Surface-Mount Hook TuneCommand Remote Transmitter Battery (model CR 2032) Lanyard Adjuster Lanyard What’s in the Box P74852_F8Z024_uk.
Operating Instructions STEP 1 - TuneCommand Receiver Setup 1. Power on your iPod. Then, plug the TuneCommand Receiver into the iPod device’s remote/headphone connector (Fig. 1). The Receiver powers on automatically and its green light blinks three times. iPod or iPod mini Stereo Connector Fig.
Operating Instructions STEP 2 - TuneCommand Remote Setup 1. Turn your Remote with the buttons facing down. Press the release button to open the battery tray, and gently pull it out of the housing until it stops (Fig. 2). Please do not force the battery tray completely out of the housing. Fig. 2 Fig. 3 2. Insert the battery with the (+) side facing up (Fig. 3) and push the battery cover back into the Remote until the button snaps back into place. 3.
Operating Instructions STEP 2 - TuneCommand Remote Setup Use the stereo connector on top of the TuneCommand Receiver to connect your iPod to your stereo system. As an alternative, you can connect to your stereo system via the iPod device’s docking cradle and its built-in line-out port. You can now use your TuneCommand Remote handset to control the iPod device’s play/pause, skip forward, skip backward, and volume up/down functions.
� Operating Instructions ����� ������������������� ����� Green Received the signal ������������������� Green ����� The receiver receives the signal �������������������������������� LED Chart Every time you push a button on the Remote, the green lights on the Remote and the Receiver blink, indicating that the signal has been received correctly.
Operating Instructions Using the Multi-Clip � Do not slide on SNAP � � � Snap the clip on the Transmitter How to clip on the belt � � Adhesive backing attaches to smooth surface � � EN How to snap on the clip when using the lanyard (the clip is to be used upside down in this case) � How to use with the surfacemount hook P74852_F8Z024_uk.
Troubleshooting Receiver is not powering on when plugged into the iPod. Remove the Receiver and reinstall into the top of your iPod. Ensure your iPod is charged or connected to power, and turned on. Remote handset is not powering on. Ensure that the Remote battery is inserted correctly, with the (+) facing up, that the battery tray is fully pushed in, and the release button is snapped back into position. After connecting the Receiver and Remote, there is no sound.
Specifications Operating Range: Up to 120 ft. / 37 m. Transmission Method: Radio frequency Frequency: 2.44GHz Remote Battery: CR2032 3V Remote Dimensions: 2.75” x 1.25” x 0.5” (not including belt clip; 0.75” max depth including belt clip) Remote Weight (including battery): 0.8oz. (33.9g) Receiver Dimensions: 1.57” x 1.49” x 0.54” Receiver Weight: 0.37oz. (10.6g) Clip/Surface Mount/Lanyard: 0.47oz. (13.2g) P74852_F8Z024_uk.
Information Belkin Corporation Limited 3-Year Product Warranty Belkin Corporation warrants this product against defects in materials and workmanship for three years. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of purchase may be required.
FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.V.
