Enhanced Keyboard User Manual P73355 F8E885
Introduction Today’s sophisticated computer users demand a keyboard that is designed specifically for the way they work. Belkin is at the cutting edge of the input device marketplace, offering a full selection of features and innovative designs that speak smartly to the latest computing trends and needs. The Enhanced Keyboard will compliment any workspace.
Hardware Installation Your keyboard connects to either a PS/2 keyboard port or a Universal Serial Bus (USB) port. The Enhanced Keyboard is also compatible with AT systems (see Page 7 for special instructions). To see which type you have, look at the back of your computer for the port that is designated for your keyboard. (Some PCs will have the word KEYBOARD printed next to the port.) If you are unsure, please refer to your hardware manual.
USB Installation A. DO NOT turn off your computer. B. Remove the USB-PS/2 adapter from the end of the connector before plugging the keyboard into the computer. C. Locate the computer Universal Serial Bus (USB) port on the back of your computer. D. Plug your keyboard into the USB port. Check the box in which your keyboard was shipped to verify the ports supported. E. At this point, the Microsoft® Operating System should recognize your keyboard.
PS/2 Installation A. Make sure that the computer is turned off. B. Locate the computer PS/2 keyboard port on the back of your computer. C. Plug your keyboard into the PS/2 keyboard port. Check the box in which your keyboard was shipped to verify the ports supported. D. Turn your computer on. At this point, your keyboard will work with the built-in Microsoft® Operating System. If your keyboard does not respond, please contact the Belkin Technical Support department at (800) 223-5546 ext. 2263.
AT Installation AT installation requires a PS/2-AT adapter (not included with keyboard). A. Make sure that the computer is turned off. B. Connect the PS/2-AT adapter onto the USB-PS/2 adapter. C. Check to ensure that the USB-PS/2 adapter is firmly connected to the keyboard’s USB plug. D. Locate the computer AT keyboard port on the back of your computer E. Plug your keyboard into the AT keyboard port. Check the box in which your keyboard was shipped to verify the ports supported. F.
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F8E885 to which this declaration relates: Complies with Part 15 of the FCC Rules.
7
belkin.com Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • United Kingdom Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 © 2000 Belkin Components. All rights reserved.
