MiniScroller™ Mouse User Manual P73429 F8E841-BLK
Important Information USB Connector The USB connector is compatible with Windows® 98 and Windows® 2000. The PS/2 connector is compatible with Windows® 3.x, 95, 98, NT, and 2000.
Introduction ABOUT YOUR MOUSE 1.1 An Introduction to your new Belkin MiniScroller™ Mouse The Belkin MiniScroller™ Mouse offers you ease of use on the Internet, eliminating the need for scroll bars. You can scroll smoothly through your documents or Web Pages, browsing them more quickly and more efficiently. Imagine, with the simple movement of the scroll wheel, you can glide effortlessly through Web Pages and long documents, without having to remove your pointer from the document itself.
2. Hardware Installation 2.1 Hardware Installation Your mouse connects to either a PS/2 mouse port or a Universal Serial Bus (USB) port . To check, look at the back of your computer for the port that is designated for your mouse. Some PCs will have the word MOUSE marked next to the PS/2 connector. If you are still unsure, please refer to your hardware manual. For USB mouse port installation, simply remove the PS/2-USB adapter from the end of the connector before plugging the mouse into the computer.
Hardware Installation (continued) USB Installation a. Locate the Universal Serial Bus (USB) port on the back of your computer. b. Plug your mouse into the port. Check the box in which your mouse was shipped to verify the ports supported. c. Sometimes, when connecting the mouse into a USB port, Windows will detect the mouse and start the Add New Hardware Wizard. If it does not, then go to d, below. If the Wizard does come up, follow the on-screen instructions. 1.
1. Software Installation A step-by-step guide to getting your mouse set up Important: Before installing the MiniScroller™ software, it is strongly recommended that you remove all other third party mouse drivers. DO NOT REMOVE THE WINDOWS® DEFAULT MOUSE DRIVERS. WARNING: To avoid damage, turn your computer off before plugging or unplugging any pointing devices. Windows® 95, Windows® 98 and Windows NT® 4.0 Installation a. Insert the MiniScroller™ diskette in the A: or B: drive b.
3. Troubleshooting Q: A: Q: A: Q: A: When installing the software, which driver should I choose? The PS/2 Mouse on COM1 or Serial Mouse on COM2? If you are using a PS/2 mouse (refer to section 1.2) then the driver must state that it is using a PS/2 driver. If you are using a Serial mouse (refer to section 1.2) then the driver must state that it is using a Serial driver on COM1 or COM2. I can get into Windows® or into "Safe Mode" but I cannot use the mouse.
3. Troubleshooting (continued) "Alt + S" to go to the "Start" button in Windows® 95. Then use your "Up" Arrow to select "Settings", then use your "Right" Arrow to select "Control Panel", and then press "Enter". These steps have taken you to the "Control Panel" where you can gain access to your "Device Manager". The "Device Manager" shows your driver status and information and it will allow you to modify their settings.
3. Troubleshooting (continued) Then you will have to reboot your computer.Use your "Windows®"Key at the bottom left hand corner of your keyboard if you have one; if not, press "Alt + S". Then use the "Up" Arrow to select "Shut Down" and use your "Enter" key. Use your "Arrow" Key to select "Restart" and press "Enter". Q: A: After installing the mouse driver and rebooting, my mouse will not work.
3. Troubleshooting (continued) the mouse driver, use your "Tab" key to select "Properties" and then press "Enter". Use your "Right" Arrow key to choose the "Driver" tab and then use your "Tab" key to choose "Update driver" or "Change Driver" and then press "Enter". The next options will vary from computer to computer because there are many types of Windows® 95/98 OS versions. The wording or options will be a little different but should be somewhat the same.
3. Troubleshooting (continued) you will have to reboot your computer. Use your "Windows®"Key at the bottom left hand corner of your keyboard if you have one; if not, press "Alt + S". Then use the "Up" Arrow to select "Shut Down" and use your "Enter" key. Use the "Arrow" Key to select "Restart" and press "Enter". Q: A: Why does my external mouse not work with my laptop computer? You may have to disable the onboard mouse in order to use an external mouse.
4. How to use your mouse Get to know all of the options available to you When it comes to programming your middle button (the scroll wheel), it couldn't be any easier. On the bottom right hand corner of your screen, you will find a yellow box with an orange triangle in it. Click on this, then click "Open". Starting with the Universal Scroll section, you will be allowed to choose and restrict the direction your mouse can scroll. "X-Scroll" and "Y-Scroll" are already selected for you.
4. How to use your mouse (continued) From here, you can set how many lines per second you would like the browser to move. The higher the setting, the faster the scrolling action. "Zoom In" is measured by factors. The higher the factor, the farther in the zoom. The "Size" indicates how large of a window you have to view with. Your scroll wheel can be used for features other than scrolling.
5. Uninstall Removing the mouse software from your computer WARNING: To avoid damage, turn your computer off before plugging or unplugging any pointing devices. Windows® 95, Windows® 98 and Windows NT® 4.0 First, it will be necessary to close the "Mouse Control Panel". Click the “X” button in the upper right hand corner of the "Mouse Control Panel" window. When asked if you are sure if you want to quit the "Mouse Control", click "Yes". Now you are ready to begin the uninstall process. a. Select "Start". b.
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F8E841-BLK to which this declaration relates: Complies with Part 15 of the FCC Rules.
belkin.com Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • UK Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 © 2000 Belkin Components. All rights reserved.
