En NetMaster™ Scroll Mouse User Manual Ca Guide d’utilisation de la souris NetMaster™ avec roulette de défilement Manual de usuario para el mouse NetMaster™ con rueda de desplazamiento Mouse de Rolagem NetMaster™ - Manual do Usuário P73134 F8E204 Es Po
Table of Contents En English . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ca Français (Canada) . . . . . . . . . . . . . . . . . . 15 Es Español . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Português . . . . . . . . . . . . . . . . . . . . . . . .
1. Introduction ABOUT YOUR MOUSE 1.1 An Introduction to your new Belkin NetMaster™ Scroll Mouse The Belkin NetMaster™ Scroll Mouse offers you ease of use on the Internet, eliminating the need for scroll bars. You can scroll smoothly through your documents or Web Pages, browsing them quicker and more efficiently. Imagine, with the simple movement of the scroll wheel, you can glide effortlessly through Web Pages and long documents, without having to remove your pointer from the document itself.
1. Introduction (continued) 1.2 Connecting Your Mouse Your mouse connects to either a PS/2 (or 6 pin MiniDIN) mouse port or a 9-pin serial port. To check, look in the back of you computer for the port that is designated for your mouse. Most PCs will have the word MOUSE marked next to the PS/2 connector. Older PCs will have either Serial 1 (and up) or COM 1 (and up) for the serial connector. If you are still unsure, please refer to your hardware manual.
2. Software Installation A step-by-step guide to getting your mouse set up WARNING: To avoid damage, turn your computer off before plugging or unplugging any pointing devices. Windows® 95, Windows® 98 and Windows NT® 4.0 Installation a. Insert the NetMaster™ diskette in the A: or B: drive b. Click on "Start" in the lower left corner of your screen c. Then click on "Run" d. Type "A:setup" (or "B:setup") and then click on "OK" e.
3. Troubleshooting Q: A: Q: A: Q: A: When installing the software, which driver should I choose? The PS/2 Mouse on COM1 or Serial Mouse on COM2? If you are using a PS/2 mouse (refer to section 1.2) then the driver must state that it is using a PS/2 driver. If you are using a Serial mouse (refer to section 1.2) then the driver must state that it is using a Serial driver on COM1 or COM2. I can get into Windows® or into "Safe Mode" but I cannot use the mouse.
3. Troubleshooting (continued) "Up" Arrow to select "Settings" then use your "Right" Arrow to select "Control Panel" and then press "Enter". These steps have taken you to the "Control Panel" where you can gain access to your "Device Manager". The "Device Manager" shows your driver status and information and it will allow you to modify their settings. After entering the "Control Panel" use your "Up" and "Down" Arrows to select, "System" and then press "Enter".
3. Troubleshooting (continued) Use your "Windows®"Key at the bottom left hand corner of your keyboard if you have one; if not, press "Alt + S". Then use the "Up" Arrow to select "Shut Down" and use your "Enter" key. Use your "Arrow" Key to select "Restart" and press "Enter". Q: A: After installing the mouse driver and rebooting, my mouse will not work.
3. Troubleshooting (continued) "Update driver" or "Change Driver" and then press "Enter". The next options will vary from computer to computer because there are many types of Windows® 95/98 OS versions. The wording or options will be a little different but should be somewhat the same. Windows® will then continue to ask questions and help guide you through the changes. Use your "Arrow" Keys, "Enter", and "Tab" keys to continue through the process.
3. Troubleshooting (continued) press "Alt + S". Then use the "Up" Arrow to select "Shut Down" and use your "Enter" key. Use the "Arrow" Key to select "Restart" and press "Enter". Q: A: Why does my external mouse not work with my laptop computer? You may have to disable the onboard mouse in order to use an external mouse. Try looking in your CMOS or BIOS in order to disable the onboard mouse.
4. How to use your mouse Get to know all of the options available to you When it comes to programming your middle button (the scroll wheel), it couldn't be any easier. On the bottom right hand corner of your screen, you will find a yellow box with an orange triangle in it. Click on this, then click on "Open". Starting with the Universal Scroll section, you will be allowed to choose and restrict the direction your mouse can scroll. "XScroll" and "Y-Scroll" are already selected for you.
4. How to use your mouse (continued) like the browser to move. The higher the setting, the faster the scrolling action. "Zoom In" is measured by factors. The higher the factor, the farther in the zoom. The "Size" indicates how large a window you have to view with. Your scroll wheel can be used for features other than scrolling. You can set it to "Left Button Double Click", "F1" through "F12", "Enter" Key, "Page Up" Key, "Page Down" Key, "Home" Key, "End" Key.
5. Uninstall Removing the mouse software from your computer WARNING: To avoid damage, turn your computer off before plugging or unplugging any pointing devices. Windows® 95, Windows® 98 and Windows NT® 4.0 First, it will be necessary to close the "Mouse Control Panel". Click on the X button in the upper right corner of the "Mouse Control Panel" window. When asked if you are sure if you want to quit the "Mouse Control", click on "Yes". Now you are ready to begin the uninstall process. a. Select "Start". b.
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F8E204 to which this declaration relates: Complies with Part 15 of the FCC Rules.
En belkin.com Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • UK Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 © 2000 Belkin Components. All rights reserved.
