User Manual

• It does ship with one, the specs are 7.5 Volts DC, 2.1A.
Q: How can I tell if the hub is in Self-powered or Bus powered mode?
• Look on the side of the hub, there should be a switch that will move left to right.
Q: What is Self-powered mode and Bus powered mode?
• In Self-powered mode the ExpressBus is being powered by an external power source
of 6 VDC, 2.1A. This mode is used when connecting another hub, or when
connecting power hungry devices like keyboards, scanners and cameras.
• In Bus powered mode the ExpressBus gets it power from the USB ports on the
computers. Bus powered means you are not using a power supply.
•
Downsteam power
Self-powered: 500mA per port.
Bus-powered: 100mA per port.
Q. What is the Data Transfer rate for the USB hub?
• It supports both full speed of 12Mbps and a low speed of 1.5 Mbps.
Q: What is maximum number of device can you hook up using the USB hub.
• By cascading additional USB hubs you can connect up to 127 different devices to a
single USB port on the computer.
If your question was not answered here, please e-mail your question to
[e-mail] or call Belkin Technical Support at 310-898-1100 x2263. Before
calling, please ensure that you have all of your equipment connected and you are at the
computer.
©1998 Belkin Components. All Rights Reserved.
All trademarks and logos shown herein are the property of their respective owners
.
Bus
Self
For
Bus-powered
mode, move the
switch to the left.
For
Self-powered
mode, move the
switch to the right.