User manual

section
1
2
3
4
5
6
7
4141
41
Changing System Settings
4. You will be asked if you are sure you want to continue.
Click “OK”.
5. You will see one more message. This message tells you that the
WRE/AP may not respond for as long as one minute as the firmware is
loaded and the WRE/AP is rebooted. Click “OK”.
A 60-second countdown will appear on the screen. When the
countdown reaches zero, the WRE/AP firmware update will be
complete. The WRE/AP home page should appear automatically. If
not, type in the WRE/AP’s address (default = 192.168.2.254) into the
navigation bar of your browser.