User manual

3332
Using the Web-Based User Interface
3332 3332
Setting WPA (with radius server) Settings
If your network uses a radius server to distribute keys to the clients, use
this setting.
1. From the “Security Mode” drop-down menu, select “WPA—Radius
Server”.
2. For Encryption Technique, select “TKIP” or “AES”. This setting will
have to be identical on the clients that you set up.
3. Enter the IP address of the radius server into the “Radius Server”
fields.
4. Enter the radius key into the “Radius Key” field.
5. Enter the key interval. Key interval is how often the keys are
distributed (in packets).
6. Click “Apply Changes” to finish. You must now set all clients to match
these settings.