User manual

2120
Using the Web-Based User Interface
2120 2120
Channel and SSID
The Wireless tab lets you make changes to the wireless network settings.
From this tab you can make changes to the wireless network name (SSID),
operating channel, and encryption security settings.
(1)
(2)
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service Set
Identifier) is used. The default SSID of the WRE/AP is “belkin54g”. You can
change this to anything you want to or you can leave it unchanged. If there
are other wireless networks operating in your area, you will want to make
sure that your SSID is unique (does not match that of another wireless
network in the area). To change the SSID, type in the SSID that you want
to use in the SSID field (1) and click “Apply Changes” (2). The change is
immediate. If you make a change to the SSID, your wireless-equipped
computers must also be reconfigured to connect to your new network
name. Refer to the documentation for your wireless network adapter for
information on making this change.