User manual

1918
Using the Web-Based User Interface
1918 1918
Accessing the Web-Based Setup
Using your Internet browser, you can access the WRE/AP’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.254” (do not
type in anything else such as “http://” or “www”). Then press the “Enter”
key.
You will see the WRE/AP’s home page in your browser window. The home
page is visible to any user who wants to see it. To make any changes to
the WRE/AP’s settings, you have to log in. Clicking the “Login” button or
clicking on any one of the links on the home page will take you to the login
screen. The WRE/AP ships with no password entered. In the login screen,
leave the password blank and click the “Submit” button to log in.
Logging Out of the Web-Based Setup
One computer at a time can log into the WRE/AP in order to make changes
to its settings. There are two ways to log out: 1, by clicking the “Logout”
button; and 2, automatically, by allowing a preset
time-out period to elapse. The default time-out is 10 minutes; however, you
can set the login period from 1 to 99 minutes. For more information, see
the section in this manual titled “Changing the Login Time-Out Setting”.
Understanding the Web-Based User Interface
The home page is the first page you will see when you access the
Advanced User Interface (UI). The home page shows you a quick view
of the WRE/AP’s status and settings. All advanced setup pages can be
reached from this page.