User manual

The following is an example of what a network router LAN configuration page should

look like. You typically access the LAN settings via a web browser and type in the

routers IP address, in this example it is 192.168.2.1. This is a typical IP address of

routers.

Figure 7

This is the IP address of the router. If you type in 192.168.2.1 into a web browser it will

access the displayed router settings pages shown. The first three numbers will need to be

the same on the connected Calmotion LANCNC devices. The last number is essentially

the device number. The router is 1, the computers will be provided a number from 2 to

100, and the Calmotion LANCNC will need to have a number from 101 to 254.

This is the subnet mask. This should never be changed.

Basically, these settings will provide 99 IP addresses to the DHCP, so that 99 computers

can automatically get an IP address from the router’s DHCP. It also frees up IP addresses

from 101 to 254 to static IP address devices, i.e. Calmotion LANCNC.

- 17 -