Specifications

Authored by Simon Adams Product Support Specialist Canon UK RCC
Revision 1.2 © Canon 2006
46
Select the FTP settings tab, here we will enter settings that match the FTP server settings we set up in
stages 1 & 2 within the Local Area Connection settings and Filezilla FTP server.
The target server address should be should match the address of the PC’s IP address that is running the
server. In this case it is set to 192.168.2.40 The port number should match the port number we opened
in the FTP server, in this case Port 21 (which is in fact the industry standard port for FTP transfers).
The server name should be left blank, as the Target Server IP address identifies the FTP server, and as
the target folder is set from within the FTP server Filezilla itself, then you should specify / as the target
folder which means “Root folder” in FTP terms. Leave passive mode off, and overwrite same file on if
you want to
Use the login and password you set in Filezilla earlier, in this case we are using the username canonuk
and the password pass. Ensure that you use the exactly the same characters, and ensure they are the
same case, any mismatch in the username and password will result in the WFT-E1A issuing an error
and failing to transmit its images.
No proxy is required so leave this blank.